Shingleback Dolly Stand

The all new Shingleback Dolly Stand replaces the original much loved Trolley Stand as an even easier solution that still adds a second purpose to your Shingleback rack. Slot your rack into the Dolly Stand and it becomes a sturdy bike storage system for your shed or garage that keeps your bikes neat and out of harm’s way.

Another great feature of the Shingleback Dolly Stand is that you can also use the Dolly to transport your rack to your vehicle taking away the need to lift and carry your rack. The new Dolly is easier to move, even with a fully loaded rack, with the help of the 4 ball bearing swivel castors you can easily move it to where it’s needed. Unloaded, a Shingleback rack on the Dolly can even be maneuvered through a standard 900mm wide doorway. Each castor comes with a foot operated brake to prevent any runaway incidents!

The Shingleback Rack can be tilted down to about half way on the Dolly Stand for easy loading, however care must be taken if multiple bikes are loaded to avoid overbalancing.

Compatible with all racks in the Shingleback range, the Dolly Stand is very sturdy to handle a fully loaded rack, is made from quality steel, shot blasted, then top coated in a tough scratch resistant powder coat to ensure years of hassle free service.

The specs for the Dolly Stand are:

• Width = 1200mm
• Length = 900mm
• Height to top of Dolly hitch = 250mm
• Height to top of cradle (Lite rack) = 1750mm
• Height to top of bike wheel (29”) = 2150mm

Typically a loaded bike has the top of the wheel (29”) at 2150mm high, and we recommend a ceiling height of 2300mm. However, it’s possible to make it work with a ceiling height of 2200mm.

*Does not suit swing away arm

*Does not include bike carrier