Conduit Clamps

Rola Titan

MULTI FIT PIPE CLAMP PAIR 100MM

SKU: RHSPC

Rhino-Rack

Rhino-Rack BC2-150 150mm Conduit Clamps (x2)

This kit consists of 2 clamps to allow a 150mm / 6" Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar.

SKU: BC2-150

Rhino-Rack

Rhino-Rack BC3 Conduit Clamp Set - 3 Piece

The BC3 Conduit Clamp Set will adapt a 100mm / 4" Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.

SKU: BC3

Rhino-Rack

Rhino-Rack BC3-150 150mm Conduit Clamps (x3)

This kit consists of 3 clamps to allow a 150mm / 6" Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar.

SKU: BC3-150

Rhino-Rack

Rhino-Rack BC3-LSB Conduit Lower Side Bracket

This bracket allows your conduit to be mounted off the side giving more space along the cross bars for other equipment.

SKU: BC3-LSB

Rhino-Rack

Rhino-Rack RPC4 Pipe Clamps - Heavy Duty (100mm/4inches)

Made from galvanized steel, these 100mm / 4" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Heavy Duty Bar, and are secured in place with an M8 bolt and nyloc nut.

SKU: RPC4

Rhino-Rack

Rhino-Rack RPC6 Pipe Clamps - Heavy Duty (150mm/6inches)

Made from galvanized steel, these 150mm / 6" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Heavy Duty Bar, and are secured in place with an M8 bolt and nyloc nut.

SKU: RPC6

Rhino-Rack

Rhino-Rack SPC4 Vortex Pipe Clamps (100mm/4inches)

Made from galvanized steel, these 100mm / 4" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex Bar, and are secured in place with an M8 bolt and nyloc nut.

SKU: SPC4

Rhino-Rack

Rhino-Rack SPC6 Vortex Pipe Clamps (150mm/6inches)

Made from galvanized steel, these 150mm (6") pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex Bar, and are secured in place with an m8 bolt and nyloc nut.

SKU: SPC6

Rhino-Rack

Rhino-Rack VACB Vortex Fit Kit for Conduit Brackets

The VACB kit allows you to fit the BC2, BC3 or BC4 conduit Bracket to a Rhino-Rack Vortex Bar. The kit comprises of channel nuts and bolts for seamless installation.

SKU: VACB

Rhino-Rack

Rhino-Rack BC2 Conduit Clamp Set - 2 Piece

The BC2 Conduit Clamp Set will adapt a 100mm / 4" Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.

SKU: BC2