Conduit


25 Products Found

Rhino P30-150 Conduit Carrier (3m/150mm)

The P30-150 is a 3m / 9.8ft long, 150mm / 6" diameter Conduit Carrier with Ribbed Conduit End Caps that easily screw on and off to allow you easy access to your pipes.

$342.32

12% OFF

RRP $389.00

Rhino P46-150 Conduit Carrier (4.6m/150mm)

The P46-150 is a 4.6m / 15ft long, 150mm / 6" diameter Conduit Carrier with Ribbed Conduit End Caps that easily screw on and off to allow you easy access to your pipes.

$342.32

12% OFF

RRP $389.00

Rhino P46-100 Conduit Carrier (4.6m/100mm)

The P46-100 is a 4.6m / 15ft long, 100mm / 4" diameter Conduit Carrier with Ribbed Conduit End Caps that provide maximum security with our built in Masterkey™ compatible steel locks.

$200.64

12% OFF

RRP $228.00

Rhino P30-100 Conduit Carrier (3.0m/100mm)

The P30-100 is a 3m / 9.8ft long, 100mm / 4" diameter Conduit Carrier with Ribbed Conduit End Caps that easily screw on and off to allow you easy access to your pipes.

$150.48

12% OFF

RRP $171.00

Rhino BEC Conduit End Cap & Sleeve

The Conduit End Cap & Sleeve is the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Cap & Sleeve features a ribbed end cap for added grip as well as a secure wire trace for easier operation and loss prevention.

$103.00

Rhino BC150 Conduit End Cap - 150mm

Ideal for use as a replacement or spare, the BC150 End Cap is perfectly suited for use with any of Rhino-Rack's 150mm (6") width Conduit Carriers.

$72.00

Rhino BC3 Conduit Clamp Set - 3 Piece

The BC3 Conduit Clamp Set will adapt a 100mm / 4" Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.

$62.00

14% OFF

RRP $72.00

Rhino BCW Conduit End Cap - 100mm

Ideal for use as a replacement or spare, the BCW Conduit End Cap is perfectly suited for use with any of Rhino-Rack's 100mm / 4" width Conduit Carriers.

$51.00

Rhino SPC6 Vortex Pipe Clamps (150mm/6inches)

Made from galvanized steel, these 150mm (6") pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex Bar, and are secured in place with an m8 bolt and nyloc nut.

$48.00

Rhino RPC6 Pipe Clamps - Heavy Duty (150mm/6inches)

Made from galvanized steel, these 150mm / 6" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Heavy Duty Bar, and are secured in place with an M8 bolt and nyloc nut.

$46.00

Rhino SPC4 Vortex Pipe Clamps (100mm/4inches)

Made from galvanized steel, these 100mm / 4" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex Bar, and are secured in place with an M8 bolt and nyloc nut.

$42.00

Rhino RPC4 Pipe Clamps - Heavy Duty (100mm/4inches)

Made from galvanized steel, these 100mm / 4" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Heavy Duty Bar, and are secured in place with an M8 bolt and nyloc nut.

$40.00

Rhino BEC150 Conduit End Cap & Sleeve

The Conduit End Cap & Sleeve is the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Cap & Sleeve features a ribbed end cap for added grip as well as a secure wire trace for easier operation and loss prevention.

$179.52

12% OFF

RRP $204.00

Rhino BC4 Conduit Clamp Set - 4 Piece

The BC4 Conduit Clamp Set will adapt a 100mm / 4" Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 4 clamps and allows for mounting of the conduit above or below the bar.

$94.00