Intervolt ISM001A-P Inertial Sensing Module
SKU code: ISM001A-P
Make it a Bundle
Description
Features
Specifications
Reviews
The Inertial Sense Module or ISM is a solid-state electronic device developed for use with the interVOLT DCC Pro.
In simple terms the ISM detects movement when attached to the vehicle chassis or body. Once the input voltage is within operating range this movement will provide a trigger signal to the DCC Pro and initiate the charging cycle.
This enables the DCC Pro to be operated in Ignition Mode without having to tap into the vehicle manufacturer’s wiring system to obtain a signal. As a result, the whole DCC Pro install becomes totally independent of the vehicle’s electrical system, aside from the common connection of the main battery terminals.
The ISM incorporates a short wiring harness (tail) which connects directly to the DCC Pro without any changes to the installation (if retrofitting) or any modification to the existing wiring harness.
The ISM is an over-moulded device rated to IP67 (dust and water proof) and can be fastened with the high-quality 3M tape included or via a single screw. Single screw fastening is recommended where vibration is minimal.
The compact size of the ISM allows it to be installed almost anywhere, within reach of the DCC Charging Device, of course. It is not recommended to extend the wiring harness but if Voltage Drop is factored in, it can be undertaken.
The ISM has a single LED indicator which will blink every 8 seconds in standby mode. Once activated by movement the LED will illuminate continuously until such time as the vibration/acceleration is no longer detected and the Voltage drops below the factory parameters.
Design Voltage – 8 – 16 VDC
Switch On Voltage – 13.2V ± 0.1V
Switch Off Voltage – 12.8V ± 0.1V
Standby Current – 2 mA
Operating Current – 5 mA
LED Indicator – Green
Environmental Protection – IP67
Operating Temperature – -20°C to +85°C
Dimensions – 34mm x 38mm x 12.5mm
Weight – 30 Grams
| SKU | ISM001A-P |
|---|---|
| Brand | Intervolt |
Special Order Available
Calculate Shipping:
Road Express $12.95
In-stock orders typically Dispatch within 1-3 business days. We partner with a range of Couriers to provide fast, accurate shipping.Warehouse Pick-up FREE
Pick-up directly from A1 Roof Rack's Newcastle Warehouse. Pick-up by Appointment onlyBackorder? No problem.
Purchase today to lock in this price and secure your place in the queue.
We will send it immediately once it's back in stock.
Estimated Restock: May 2024
Need Some Advice?
Speak to one of our experts:
- 02 8318 7755
- Live Chat
- Email Us
We operate Mon-Fri 9:30am - 5pm,
Sat 9:30am - 1pm
Documents
Description
Features
Specifications
Reviews
The Inertial Sense Module or ISM is a solid-state electronic device developed for use with the interVOLT DCC Pro.
In simple terms the ISM detects movement when attached to the vehicle chassis or body. Once the input voltage is within operating range this movement will provide a trigger signal to the DCC Pro and initiate the charging cycle.
This enables the DCC Pro to be operated in Ignition Mode without having to tap into the vehicle manufacturer’s wiring system to obtain a signal. As a result, the whole DCC Pro install becomes totally independent of the vehicle’s electrical system, aside from the common connection of the main battery terminals.
The ISM incorporates a short wiring harness (tail) which connects directly to the DCC Pro without any changes to the installation (if retrofitting) or any modification to the existing wiring harness.
The ISM is an over-moulded device rated to IP67 (dust and water proof) and can be fastened with the high-quality 3M tape included or via a single screw. Single screw fastening is recommended where vibration is minimal.
The compact size of the ISM allows it to be installed almost anywhere, within reach of the DCC Charging Device, of course. It is not recommended to extend the wiring harness but if Voltage Drop is factored in, it can be undertaken.
The ISM has a single LED indicator which will blink every 8 seconds in standby mode. Once activated by movement the LED will illuminate continuously until such time as the vibration/acceleration is no longer detected and the Voltage drops below the factory parameters.
Design Voltage – 8 – 16 VDC
Switch On Voltage – 13.2V ± 0.1V
Switch Off Voltage – 12.8V ± 0.1V
Standby Current – 2 mA
Operating Current – 5 mA
LED Indicator – Green
Environmental Protection – IP67
Operating Temperature – -20°C to +85°C
Dimensions – 34mm x 38mm x 12.5mm
Weight – 30 Grams
| SKU | ISM001A-P |
|---|---|
| Brand | Intervolt |
