Description
Specifications
Reviews
This plug-and-play 40A DC-DC Charger wiring kit makes it easy to install your DC-DC – helping to keep your batteries topped up while on the road or via the sun with a solar input.
At 6.5 metres long, there’s enough wiring to help get you from the engine bay to the back of the vehicle, suitable for even those longer 4×4 setups. Using a heavy-duty 6AWG cable and a 60A fuse, this kit will help minimise the voltage drop between your starter and auxiliary battery and protect your setup from damage in case of a system fault.
In the kit, you’ll find a 3m accessories lead, designed for use on vehicles with a smart alternator, a pre-wired 3-pin Anderson-style lead designed to plug straight into your DC-DC, as well as a replacement fuse, cable ties, and a couple of screws to help mount your Anderson-style connector in place.
Features
- Three-in Anderson Plug with Built-in Ignition Wire: This innovative plug design incorporates a built-in ignition wire, simplifying the installation process and ensuring a secure and reliable connection for your charging system.
- Backwards Compatible with Two-Pin Plugs: Our wiring kit is designed to be backwards compatible with two-pin plugs, offering greater flexibility and compatibility with a wider range of existing setups.
- 6.5m 6AWG Cable with 60A Fuse: The kit includes a 6.5-meter long, heavy-duty 6AWG cable, providing ample length for various installation scenarios. The integrated 60A fuse adds an extra layer of protection, ensuring safe and efficient operation of your charging system.
Specifications
- Cable length:
- Red/black cable: 6.5m 6AWG
- Blue cable: 1.5mm² / 15AWG
- Ring terminal size: M8
- Fuse: 60A
Pack Contents
- 1x 6.5m 6AWG cable with 40A fuse
- 1x Replacement 60A fuse
- 10x Cable ties
- 4x Plug mounting screws
- 1x 3-pin Anderson-style plug
- 6x Spare Anderson-style plug terminals
- 1x 3m accessories wire
| SKU | HKPDCDCWIR40 |
|---|---|
| Barcode # | 9350466004427 |
| Brand | HardKorr |
Description
Specifications
Reviews
This plug-and-play 40A DC-DC Charger wiring kit makes it easy to install your DC-DC – helping to keep your batteries topped up while on the road or via the sun with a solar input.
At 6.5 metres long, there’s enough wiring to help get you from the engine bay to the back of the vehicle, suitable for even those longer 4×4 setups. Using a heavy-duty 6AWG cable and a 60A fuse, this kit will help minimise the voltage drop between your starter and auxiliary battery and protect your setup from damage in case of a system fault.
In the kit, you’ll find a 3m accessories lead, designed for use on vehicles with a smart alternator, a pre-wired 3-pin Anderson-style lead designed to plug straight into your DC-DC, as well as a replacement fuse, cable ties, and a couple of screws to help mount your Anderson-style connector in place.
Features
- Three-in Anderson Plug with Built-in Ignition Wire: This innovative plug design incorporates a built-in ignition wire, simplifying the installation process and ensuring a secure and reliable connection for your charging system.
- Backwards Compatible with Two-Pin Plugs: Our wiring kit is designed to be backwards compatible with two-pin plugs, offering greater flexibility and compatibility with a wider range of existing setups.
- 6.5m 6AWG Cable with 60A Fuse: The kit includes a 6.5-meter long, heavy-duty 6AWG cable, providing ample length for various installation scenarios. The integrated 60A fuse adds an extra layer of protection, ensuring safe and efficient operation of your charging system.
Specifications
- Cable length:
- Red/black cable: 6.5m 6AWG
- Blue cable: 1.5mm² / 15AWG
- Ring terminal size: M8
- Fuse: 60A
Pack Contents
- 1x 6.5m 6AWG cable with 40A fuse
- 1x Replacement 60A fuse
- 10x Cable ties
- 4x Plug mounting screws
- 1x 3-pin Anderson-style plug
- 6x Spare Anderson-style plug terminals
- 1x 3m accessories wire
| SKU | HKPDCDCWIR40 |
|---|---|
| Barcode # | 9350466004427 |
| Brand | HardKorr |
You May Also Like
SKU: HKPDCBOXSM
$129.00
SKU: HKPDCBOXLG
$149.00
