Description
Features
Specifications
Reviews
The P30-100 is a 3 metre long, 100mm diameter Conduit Carrier with Ribbed Conduit End Caps that provide maximum security with their built in Masterkey compatible steel locks.
This endcap was designed to provide maximum security with their built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.
Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.
The conduit can be fitted to the Rhino-Rack Heavy Duty Bars using the Rhino-Rack Rack conduit clamps RPC4, BC2, BC3, BC4. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.
Features:
- Integrated lock, Masterkey compatible
- O-Ring seal reduces dust and water build up inside the conduit pipe
- Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
- Simple twist and lift operation
- Lid remains open even when your vehicle is parked on an incline
- Double wall internal pivot plate
- Dynamic testing to AS1235:2000
- Crash tested to ISO11154:2006
- Conduit size 3m /100mm (10ft/4inches)
- Recommended maximum carrying capacity is 15kg / 33lb
- Designed and Made in Australia
- 5 Year Warranty
- MasterKey compatible
- End Caps Supplied on both ends of conduit
This endcap was designed to provide maximum security with their built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.
Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.
The conduit can be fitted to the Rhino-Rack Heavy Duty Bars using the Rhino-Rack Rack conduit clamps RPC4, BC2, BC3, BC4. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.
Features:
- Integrated lock, Masterkey compatible
- O-Ring seal reduces dust and water build up inside the conduit pipe
- Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
- Simple twist and lift operation
- Lid remains open even when your vehicle is parked on an incline
- Double wall internal pivot plate
- Dynamic testing to AS1235:2000
- Crash tested to ISO11154:2006
- Conduit size 3m /100mm (10ft/4inches)
- Recommended maximum carrying capacity is 15kg / 33lb
- Designed and Made in Australia
- 5 Year Warranty
- MasterKey compatible
- End Caps Supplied on both ends of conduit
| Length | 3m |
|---|---|
| Conduit Size | 100mm |
| SKU | P30-100 |
| Model # | P30-100 |
| Barcode # | 9321911017897 |
| Brand | Rhino-Rack |
| Shipping Weight | 5.0000kg |
| Shipping Width | 0.200m |
| Shipping Height | 0.200m |
| Shipping Length | 3.200m |
Description
Features
Specifications
Reviews
The P30-100 is a 3 metre long, 100mm diameter Conduit Carrier with Ribbed Conduit End Caps that provide maximum security with their built in Masterkey compatible steel locks.
This endcap was designed to provide maximum security with their built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.
Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.
The conduit can be fitted to the Rhino-Rack Heavy Duty Bars using the Rhino-Rack Rack conduit clamps RPC4, BC2, BC3, BC4. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.
Features:
- Integrated lock, Masterkey compatible
- O-Ring seal reduces dust and water build up inside the conduit pipe
- Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
- Simple twist and lift operation
- Lid remains open even when your vehicle is parked on an incline
- Double wall internal pivot plate
- Dynamic testing to AS1235:2000
- Crash tested to ISO11154:2006
- Conduit size 3m /100mm (10ft/4inches)
- Recommended maximum carrying capacity is 15kg / 33lb
- Designed and Made in Australia
- 5 Year Warranty
- MasterKey compatible
- End Caps Supplied on both ends of conduit
This endcap was designed to provide maximum security with their built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.
Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.
The conduit can be fitted to the Rhino-Rack Heavy Duty Bars using the Rhino-Rack Rack conduit clamps RPC4, BC2, BC3, BC4. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.
Features:
- Integrated lock, Masterkey compatible
- O-Ring seal reduces dust and water build up inside the conduit pipe
- Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
- Simple twist and lift operation
- Lid remains open even when your vehicle is parked on an incline
- Double wall internal pivot plate
- Dynamic testing to AS1235:2000
- Crash tested to ISO11154:2006
- Conduit size 3m /100mm (10ft/4inches)
- Recommended maximum carrying capacity is 15kg / 33lb
- Designed and Made in Australia
- 5 Year Warranty
- MasterKey compatible
- End Caps Supplied on both ends of conduit
| Length | 3m |
|---|---|
| Conduit Size | 100mm |
| SKU | P30-100 |
| Model # | P30-100 |
| Barcode # | 9321911017897 |
| Brand | Rhino-Rack |
| Shipping Weight | 5.0000kg |
| Shipping Width | 0.200m |
| Shipping Height | 0.200m |
| Shipping Length | 3.200m |
