Description
Features
Specifications
Reviews
The RLKS2 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar, this set of spacers will raise the cross bar 18mm in height.
These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like their legs, they are strong and flexible.
All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the RLK2500HALF-JB JB Spacer / Height Adjustor.
This kit includes:
- 4 Spacer Blocks (max height 18mm)
- 2 x M6 x 40mm Bolts
These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like their legs, they are strong and flexible.
All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the RLK2500HALF-JB JB Spacer / Height Adjustor.
This kit includes:
- 4 Spacer Blocks (max height 18mm)
- 2 x M6 x 40mm Bolts
| SKU | RLKS2 |
|---|---|
| Model # | RLKS2 |
| Barcode # | 9321911020859 |
| Brand | Rhino-Rack |
| Shipping Weight | 0.3700kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.050m |
| Shipping Length | 0.190m |
Description
Features
Specifications
Reviews
The RLKS2 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar, this set of spacers will raise the cross bar 18mm in height.
These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like their legs, they are strong and flexible.
All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the RLK2500HALF-JB JB Spacer / Height Adjustor.
This kit includes:
- 4 Spacer Blocks (max height 18mm)
- 2 x M6 x 40mm Bolts
These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like their legs, they are strong and flexible.
All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the RLK2500HALF-JB JB Spacer / Height Adjustor.
This kit includes:
- 4 Spacer Blocks (max height 18mm)
- 2 x M6 x 40mm Bolts
| SKU | RLKS2 |
|---|---|
| Model # | RLKS2 |
| Barcode # | 9321911020859 |
| Brand | Rhino-Rack |
| Shipping Weight | 0.3700kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.050m |
| Shipping Length | 0.190m |
